Brand Name: NAILCO
Materials: UV Curable Resin
Volume:15ML/0.5 fl.oz
Certification: MSDS, SGS
Curing Tools: UV Lamp, LED Lamp, UV/LED CCFL Lamp
Three Steps to manicure by yourself:
1.-Shape nail surface, clean the cuticles, buffing nail surface and clean the dust.
2.-Apply NAILCO BASE coat (Remember to seal the edge of the nail).
Cure with LED lamp for 60 seconds or UV lamp for 2 minutes.
3.-Apply 1st layer of NAILCO color coat.
Cure with LED lamp for 60 seconds or UV lamp for 2 minutes.
4.-Apply more layer of color coat if color is not bright enough.
5.-Apply the NAILCO TOP coat.
Cure with LED lamp for 60 seconds or UV lamp for 2 minutes.
6.-Wipe the tacky residue on nails with the cleanser.
Two Steps to remove:
1.-Soak off the nails into acrylic remover for about 5 minutes.
2.-Rip down the whole piece of nail enamel gently on each nail.
Kindly reminder:
1.-The net weight is 15ML. But the capacity of the bottle is more than 15ML,
Gel will not be fully filled in the bottle!
2.-Keep tightly sealed, keep out of sunlight, keep out of reach of children.














Q&A
1. Not dry?
Excluding the factor of the dryer lamp, It is actually dry,
please don't forget to use the nail cleanser or the rubbing alcohol to wipe the sticker layer after curing the top coat.
2. Too thick?
Painting skill is the key.
Before using, stiring the gel slightly and brush the bottleneck to control it to the thinner gel,
Then, painting each thinner layer for the nails, evenly and 2-3 layers coverage can rich the color and basically achieve the advertisement effect.